Electron Microscopes
Electron Microscopy Sciences Standard Pin SEM Stub Slotted 2-1/2" Head, 3/8" Pin, Aluminum, 3.2 mm Pin diameter
Slotted head scanning electron microscope (SEM) mount for use with AMRAY, Cambridge, Leica, ZEISS/LEO, FEI/Philips, CamScan, and Tescan microscopes.
Head: 2.5"
Pin height: 3/8"
Pin diameter: 3.2 mm
Electron Microscopy Sciences Hitachi M4 SEM Cylinder Mount 2" surface, 1/4" height, Aluminum
Hitachi M4 Thread SEM mounts made from lathe finished ultra-pure aluminum.
Head: 2"
Height: 1/4"
Electron Microscopy Sciences Standard Pin SEM Stub 3-Division 1/2" Head with 9 mm Pin, Aluminum, 3.2 mm Pin diameter
3-Division surface pin stub mounts are for use with FEI/Philips, ZEISS/LEO, Cambridge, Leica, Amray, Tescan and Camscan are made from lathe finished ultra-pure aluminum.
Head: 1/2"
Pin height: 9 mm
Pin diameter: 3.2 mm
Electron Microscopy Sciences JEOL SEM Cylinder Mount 1-1/4" surface, 3/8" height, Aluminum
Cylinder specimen mounts are for use with JEOL scanning electron microscopes. The mounts are made from ultra-pure aluminum with a standard lathe finish.
Head: 1-1/4"
Height: 3/8"
Electron Microscopy Sciences Standard Pin SEM Stub 9-Division 25 mm Head with 9 mm Pin, Aluminum, 3.2 mm Pin diameter
9 divisions surface min stub mounts are for use with FEI/Philips, ZEISS/LEO, Cambridge, Leica, Amray, Tescan and Camscan SEMs. Mounts are made from lathe finished ultra-pure aluminum.
Head: 1"
Pin height: 9 mm
Pin diameter: 3.2 mm
Electron Microscopy Sciences Omniprobe All Tungsten Probe Tip
Custom tip designed from tungsten. Tip radius is 0.5um with 13 degree taper angle for maximum lifetime service.
Ted Pella Inc COPPER TAPE COND.SGL ADH.
Copper Conductive Tape, 6.3mm W x 16.4m L; 1/4 in. x 18yd, Core diameter is 76mm, Foil Thickness: 0.04mm, Total Thickness: 0.07mm, Resistance through Adhesive: 0.005ohm
Med Vet International petMAP Mobile Veterinary Monitoring Accessories - Pole Mount, J1750A, Each
petMAP Mobile Veterinary Monitoring Accessories - Pole Mount, J1750A, Each
Electron Microscopy Sciences Standard Pin SEM Stub 100 mm Head, Aluminum, 3.2 mm Pin diameter
Pin stub mount for use with AMRAY, Cambridge, Leica, ZEISS/LEO, FEI/PHILIPS, CanScan, and Tescan. Made from ultra-pure aluminum with a standard lathe finish.
Head: 100 mm
Pin diameter: 3.2 mm
Electron Microscopy Sciences E-Beam Lithography Mount
This mount, made from aluminum features an M4 threaded hole and is 25 mm in diameter. The clips are made from copper. The mount comes complete with a Faraday Cup (2.5 mm x 100nm hole) and a gold/carbon resolution sample 3 mm in diameter is included. The gold particle size range is 5-150nm.
Electron Microscopy Sciences Porta-Vac II Air Intake Filters
Replacement air intake filters for Porta-Vac II.
Electron Microscopy Sciences ExP Vacuum Wand Kit for 4" (100mm) wafers, Molded Flat wafer tip, ⅛" coiled hose and stand
ExP Vacuum Wand wafer handling kits are a lower cost alternative to the Porta-Wand and Porta-Vac II systems, which share the same tips. Has a push-button to close the vacuum and release the wafer. The included stand keeps the button pressed when the wand is not in use. Comes complete with an ⅛" Inner Diameter coiled vacuum hose and a wafer tip. Must use a vacuum pump or vacuum line. Able to be used with our Vacuum Pick Up System. Comes with 1/8" coiled hose and stand.
Includes: Molded Flat wafer tip, ⅛" coiled hose and stand
Electron Microscopy Sciences ExP Vacuum Wand Kit for 6" (150mm) wafers, Molded PEEK wafer tip, ⅛" coiled hose and stand
ExP Vacuum Wand wafer handling kits are a lower cost alternative to the Porta-Wand and Porta-Vac II systems, which share the same tips. Has a push-button to close the vacuum and release the wafer. The included stand keeps the button pressed when the wand is not in use. Comes complete with an ⅛" Inner Diameter coiled vacuum hose and a wafer tip. Must use a vacuum pump or vacuum line. Able to be used with our Vacuum Pick Up System. Comes with 1/8" coiled hose and stand.
Includes: Molded PEEK wafer tip, ⅛" coiled hose and stand
Enterprise Technology Solutions Deflecto Bin System,Modular,6-Bin,23-5/8"x3-5/8"x4-1/2",White/CL
Modular unit with white frame and six clear bins features a unique interlocking design that lets you mix, match and stack different sizes. Mount bin storage system to a wall or place on a countertop. Bins tilt out, stay open and then close again with the touch of a finger. Each bin can be easily removed from locking mechanism for easy cleaning or refilling. Tilt Bin Storage System includes mounting hardware and identification labels.